Your position:Home > News

Cement brick machine production, heating and noise of the bearing

2014-04-30

Cement brick making machine now invest more and more customers , continue to have customer advisory cement brick bearing temperature is too high or bearing noise , bearing red brick making machine is the more important parts, its performance directly affects the normal operation of the device and production efficiency. Process equipment operation , the user should pay special attention to heat and noise bearing parts of the bearing abnormal to early treatment .
  1,The shaft with the bearing cap and tight , with the bearing and the shaft too tight or too loose will lead bearing overheating. Once this problem occurs in the equipment operation, will issue an audible and obvious friction swing . Remove the bearings should be shut down . Dressing friction parts , and then re-assembled as required .
  2 , Two rugged bearing or motor rotor and rotor misalignment mill , will receive an additional load bearing impact , causing the bearing to overheat. This occurs , should immediately stop troubleshooting, in order to avoid premature bearing damage.
  3 , cement brick machine bearing oil too much, too little or aging is caused mainly due to bearing overheating and damage , therefore , requested to be on time and according to the book that use quantitative filling oil , generally accounting for bearing lubrication space 70-80 percent , too much or too little is not conducive to bearing lubrication and heat transfer.

SKYPE: kevinlee02
QQ: 81573401
Tel: 0086-371-87091886
Fax:0086-371-87091887
E-mail:zzbona@zzbona.com

Name:
*
E-mail:
Message:

Copyright @ Bona enterprise. All rights reserved. Site Index Product Index

Design & Development by sinoart