Your position:Home > News

Concrete mixing plant hosts to be checked weekly

2014-05-13

We know that the maintenance of concrete mixing station can be summed up in one sentence is , every day routine maintenance , maintenance of the week , half a large maintenance, maintenance work can be seen on the mixing station degree of importance , here we stand stirring run weekly maintenance inspection items What ? Concrete mixing station hosts a weekly maintenance checks maintenance project is divided into the following seven conditions : 1, check the condition of wire rope and coated on its surface a little butter , rope wear to a certain extent , it should be replaced ; 2 Check the gearbox oil level , check the lubrication of wheel bearings and pulleys to the hopper filling oil bearing ; 3 , the water supply system should be kept clean to prevent blockage of the suction valve inspection cleaned once ; 4, check the limit switch arm is loose , if loose should make the necessary adjustments ; 5 , check the blade attachment bolts , support arm connecting bolts are loose, adjust the gap between the blade and the arm cylinder , cylinder arm between the blade and the maximum gap of not more than 5mm and make the necessary fastening ; 6 , check the power contacts situation ; 7 , twist open the blockage , check the shaft seal , the need to make the necessary adjustments to the repair and replacement.

SKYPE: kevinlee02
QQ: 81573401
Tel: 0086-371-87091886
Fax:0086-371-87091887
E-mail:zzbona@zzbona.com

Name:
*
E-mail:
Message:

Copyright @ Bona enterprise. All rights reserved. Site Index Product Index

Design & Development by sinoart