How to Prolong The Life of The Vacuum Extruder

With economic globalization accelerated, businesses are showing a lot of prosperity scene, building materials industry is no exception.

Building materials in the construction industry is the mainstay of wall materials, brick building materials industry has become the only way to prosperity and development, and there are many difficulties in this rich brick road, we need to overcome one by one to solve, many owners suffer without its own technical staff, resulting in a waste of equipment, as well as the production of waste materials.

 

As we all know, is to rely on vacuum extruder vacuum principle to work in the vacuum of the process will produce some heat, then you need people came for pumping vacuum pipe cooling, we have a general formula using cooling water way on the vacuum pipe cooling. This can be well protected vacuum of the vacuum chamber, to avoid dangerous accidents. Secondly, in the course of a vacuum extruder, vacuum extruder wear resistance and size of the material is also relevant, imagine if size of the material itself is very small, then vigorously stirred in a vacuum extruder process, the stirring will reduce the wear and tear of the shaft, while the raw water hardness and parameters are vacuum extruder will have some impact. Therefore, fired brick production process, Bona technicians advocate the owners must deal with the crushing of raw materials stage a complete break, the Senate is also subject to the proportion of water after a certain experiments.

 

Improved design in addition to special treatment on the raw material outside, Bona enterprise is still a vacuum extruder production, Bona production of vacuum extruder used agitator shaft sleeve protect the spindle is not directly subject to wear and tear, while a partial vacuum extruder extrusion, Bona floating shaft design is the perfect solution to the vacuum extruder nod phenomenon during extrusion.