Hydraulic brick machine maintenance seven

To introduce you to the hydraulic brick machine maintenance measures , I hope for your help.

1 , hydraulic brick machine equipment , such as long-term storage when not in regular use , it should be cleaned and coated with anti-rust oil properly preserved .
Will damage the gauge 2, gauge switch is in the long-term open state, so the pressure is adjusted gauge switch should be closed .
3 , the fuel tank seal replaced once every six months .
4 , manual clay brick making machine before use each boot , you should empty load operation for 2-5 minutes , low winter temperatures , it takes longer , the machine according to this time should be empty after the load operation can work .
5 , once the fastening bolts should be tightened class liquid PRESS various parts of the pump and bracket, solenoid valve , solenoid valve and connecting pipe joints and columns should pay attention to the tightening nut .
6 , liquid PRESS cleanup work to do , after the end of each class should be liquid PRESS workbench and various parts of the falling debris , dust cleaned. Under no circumstances should measures rain cover to avoid being poured liquid PRESS , templates, clean water , scrub the mold coated with anti-rust oil for the next use.
7 , should pay attention to the fuel tank fly ash brick making machine be cleaned once every three months to work inside the tank filter is damaged, if they are damaged should be replaced immediately , when there is no damage to wash it clean, but also to deal with hydraulic oil clarification and filtration . Temperature changes with the seasons to replace the hydraulic oil.

Our brick machine manufacturers to provide you with better products and the most economical solution , our technical experts ready to provide technical assistance, ready to welcome you to join us drifting team, a copy of warmth awaits you .