Manual clay brick making machine brick production density is not enough reason

Manual clay brick making machine production of bricks if the density is not enough, it will affect the use effect expires, then the resulting brick density is not enough reason, what is it?

One reason, the parameter setting unreasonable cause uneven cutting. Solution: Adjust cutting various parameters, increasing the mold frame the front of the fabric, thereby increasing the height of the brick.
Second reason, shaking table cushion or spring used for a long time wear and tear, resulting in uneven vibration table, causing vibration amplitude vibration table is inconsistent.
Solution: If the shock absorber or spring wear and tear on the new ones, and then adjust the vibration table bracket height.
Three reasons are shaking table positioning axes, thereby affecting the positioning sleeve wear cloth.
Solution: Replace worn parts. Four reasons is the mold box is not the same before and after the vibration amplitude. Solution: The front of the rubber shock pad to loosen, or behind the rubber cushion tighten.

Bona foam concrete bricks machine factory always adhere to: the user needs is our efforts to build; customer satisfaction is what we always pursue.