Operating manual brick machine as you explain in detail

manual brick machine operation may seem simple, some customers still will not operate below taught to operate your manual brick machine.
1 have lower mold plate case, the manual interlocking brick making machine mold punch on opening up switch, mentioning first hook stops.
(2) feeding the mold frame downwards, starting lower mold vibration switch, microseismic (about 1.5 seconds), stop shaking. Secondary to the mold frame feeding, plus smooth so far.
3 Pull the red lever above, set the mold mold, shake up and down simultaneously open. Shock to both sides of the limit to the limit, stop.
4 open up switch, stripping. (Such as the bad mold, can be switched on the lower mold vibration, vibration side edge stripping)
5 finished with a forklift to push to conserve space.
6 to manual brick machine mold box below puts the board, falling cement brick mold.